WTB early 1928 starter
-
BobP
Topic author - Posts: 1004
- Joined: Wed Jan 09, 2019 7:24 pm
- First Name: Robert
- Last Name: Peterson
- * REQUIRED* Type and Year of Model Ts owned: 1914 tr, 1916 rdts, 1921 tr, 1923 rdst, 1925 cp. 1927 pu, 1927 tr.
- Location: MN
WTB early 1928 starter
I want to buy a god working Model A Ford early 1928 starter and bendix, 507 458 6778, Thanks, Bob.
-
Mark Gregush
- Posts: 5370
- Joined: Sat Jan 05, 2019 1:57 pm
- First Name: Mark
- Last Name: Gregush
- * REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1948 F2 Ford flat head 6 pickup 3 speed
- Location: Portland Or
- Board Member Since: 1999
Re: WTB early 1928 starter
I don't have one, but here is some information on the Abell starter with 1/2" shaft;
https://fordbarn.com/forum/showthread.p ... &showall=1
https://fordbarn.com/forum/showthread.p ... &showall=1
There was a problem with the Bendix jamming. Ford issued a service bulletin covering it using a shim between the starter and flywheel housing. If you have a copy of the Model A Service Bulletins is should be covered in them.
https://fordbarn.com/forum/showthread.p ... &showall=1
https://fordbarn.com/forum/showthread.p ... &showall=1
There was a problem with the Bendix jamming. Ford issued a service bulletin covering it using a shim between the starter and flywheel housing. If you have a copy of the Model A Service Bulletins is should be covered in them.
I know the voices aren't real but damn they have some good ideas! 
1925 Cut down pickup
1948 Ford F2 pickup
1925 Cut down pickup
1948 Ford F2 pickup