These came from an estate sale of an avid Model T & A car owner (Caterpillar Company engineer). I don't have enough experience to evaluate them, just trusting the previous owners expertise for having kept them. The bearing cages have some twist but everything fits tight when assembled. Ask questions and I'll try to answer. Sets 1 & 2 are $55 each set 3 is $60. Additional charge for shipping.
eMail or PM me
FS Used Drive Shaft Spool and Bearing Sets
-
TRDxB2
Topic author - Posts: 6262
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedsters (1919 w 1926 upgrades), 1926 (Ricardo Head)
- Location: Moline IL
- Board Member Since: 2018
FS Used Drive Shaft Spool and Bearing Sets
- Attachments
-
-
-
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger
-
RajoRacer
- Posts: 5172
- Joined: Sun Jan 06, 2019 12:18 pm
- First Name: Steve
- Last Name: Tomaso
- * REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1919 Centerdoor, 1924 TT C-Cab Express, 1925 Racer
- Location: Longbranch, WA
- Board Member Since: 2001
Re: FS Used Drive Shaft Spool and Bearing Sets
ANY twist is not serviceable - IMO.
-
TRDxB2
Topic author - Posts: 6262
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedsters (1919 w 1926 upgrades), 1926 (Ricardo Head)
- Location: Moline IL
- Board Member Since: 2018
Re: FS Used Drive Shaft Spool and Bearing Sets
I need to check them again may have used the wrong term. I had one, axle Hyatt, were the holes for the rods were elongated causing lots of twist & lean, really bad. Are ones that lean a bit with slight or no twist salvageable? What about the other parts think I'll start a discussion..
Thanks for you assessment!
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger
-
speedytinc
- Posts: 4726
- Joined: Fri Feb 12, 2021 12:24 pm
- First Name: john
- Last Name: karvaly
- * REQUIRED* Type and Year of Model Ts owned: 14/15 wide track roadster. 23 touring, 27 roadster pickup, 20ish rajo touring
- Location: orange, ca
- Board Member Since: 2020
Re: FS Used Drive Shaft Spool and Bearing Sets
Measure the rollers on each end & the middle to determine how much extra wear came from loose races cages.TRDxB2 wrote: ↑Wed Mar 06, 2024 12:39 pmI need to check them again may have used the wrong term. I had one, axle Hyatt, were the holes for the rods were elongated causing lots of twist & lean, really bad. Are ones that lean a bit with slight or no twist salvageable? What about the other parts think I'll start a discussion..
Thanks for you assessment!
A loose cage causes rollers to wear cigar shaped.
-
TRDxB2
Topic author - Posts: 6262
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedsters (1919 w 1926 upgrades), 1926 (Ricardo Head)
- Location: Moline IL
- Board Member Since: 2018
Re: FS Used Drive Shaft Spool and Bearing Sets
I started a discussion on Hyatt evaluation & restore. Came across what you indicated to measure, will do & add to the above. Lots of other info. viewtopic.php?f=2&t=41783speedytinc wrote: ↑Wed Mar 06, 2024 12:58 pmMeasure the rollers on each end & the middle to determine how much extra wear came from loose races cages.TRDxB2 wrote: ↑Wed Mar 06, 2024 12:39 pmI need to check them again may have used the wrong term. I had one, axle Hyatt, were the holes for the rods were elongated causing lots of twist & lean, really bad. Are ones that lean a bit with slight or no twist salvageable? What about the other parts think I'll start a discussion..
Thanks for you assessment!
A loose cage causes rollers to wear cigar shaped.
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger