FS RACING INTAKE MANIFOLD (SOLD)

Post parts wanted or for sale here
Post Reply Previous topicNext topic
User avatar

Topic author
Mark Chaffin
Posts: 4343
Joined: Sat Jan 12, 2019 12:11 pm
First Name: Mark
Last Name: Chaffin
* REQUIRED* Type and Year of Model Ts owned: 1911 Speedster, 1927 Lake Roadster
Location: Lake Elsinore
Board Member Since: 2001

FS RACING INTAKE MANIFOLD (SOLD)

Post by Mark Chaffin » Wed Jul 31, 2024 4:09 pm

I have two RAJO high volume intake manifolds available for purchase. These were designed for use on a boredout Model T flathead engine block. They are similar in design to the Winfield 2 up 2 down intake manifold. Ports are 1 3/8". Carburetor side throat diameter is 1 5/8". Bolt flange is Winfield Model M201 B size. Price is $200 each plus domestic shipping. Mark Chaffin (951) 805-0928
20240731_123059.jpg
20240731_123117.jpg
Last edited by Mark Chaffin on Tue Aug 13, 2024 2:52 pm, edited 1 time in total.
Top

themadmodelt
Posts: 15
Joined: Mon Aug 01, 2022 1:15 pm
First Name: Brian
Last Name: Sullivan
* REQUIRED* Type and Year of Model Ts owned: 1922
Location: Powell WY

Re: FS RACING INTAKE MANIFOLD

Post by themadmodelt » Wed Jul 31, 2024 4:35 pm

VM/txt sent
Top
User avatar

Topic author
Mark Chaffin
Posts: 4343
Joined: Sat Jan 12, 2019 12:11 pm
First Name: Mark
Last Name: Chaffin
* REQUIRED* Type and Year of Model Ts owned: 1911 Speedster, 1927 Lake Roadster
Location: Lake Elsinore
Board Member Since: 2001

Re: FS RACING INTAKE MANIFOLD

Post by Mark Chaffin » Wed Jul 31, 2024 11:53 pm

One sold to Dave. Thank you
Top

Ralph F
Posts: 165
Joined: Wed Jan 09, 2019 7:09 pm
First Name: Ralph
Last Name: Fitz-Gerald
Location: Monkton, Vermont

Re: FS RACING INTAKE MANIFOLD

Post by Ralph F » Thu Aug 01, 2024 7:56 am

Mark would this manifold fit a roof liberty eight over head.
Fitz
Top

Kevin Pharis
Posts: 1564
Joined: Thu Jan 10, 2019 3:54 pm
First Name: Kevin
Last Name: Pharis
Location: Sacramento CA
Contact:
Contact Kevin Pharis

Re: FS RACING INTAKE MANIFOLD

Post by Kevin Pharis » Fri Aug 02, 2024 1:19 am

Ralph F wrote: ↑
Thu Aug 01, 2024 7:56 am
 Mark would this manifold fit a roof liberty eight over head.
Fitz
Both the single intake and the dual intake port Roof heads have vertical mounting flange holes. No doubt port spacing is near identical tho as the ports are centered about the cylinder pairs
IMG_4882.jpeg
Top
User avatar

Topic author
Mark Chaffin
Posts: 4343
Joined: Sat Jan 12, 2019 12:11 pm
First Name: Mark
Last Name: Chaffin
* REQUIRED* Type and Year of Model Ts owned: 1911 Speedster, 1927 Lake Roadster
Location: Lake Elsinore
Board Member Since: 2001

Re: FS RACING INTAKE MANIFOLD

Post by Mark Chaffin » Fri Aug 02, 2024 8:57 am

Thank you Kevin for the info. :)
Top

Ralph F
Posts: 165
Joined: Wed Jan 09, 2019 7:09 pm
First Name: Ralph
Last Name: Fitz-Gerald
Location: Monkton, Vermont

Re: FS RACING INTAKE MANIFOLD

Post by Ralph F » Fri Aug 02, 2024 9:33 am

Thanks Kevin always good to get good information.
Fitz
Top
User avatar

Topic author
Mark Chaffin
Posts: 4343
Joined: Sat Jan 12, 2019 12:11 pm
First Name: Mark
Last Name: Chaffin
* REQUIRED* Type and Year of Model Ts owned: 1911 Speedster, 1927 Lake Roadster
Location: Lake Elsinore
Board Member Since: 2001

Re: FS RACING INTAKE MANIFOLD

Post by Mark Chaffin » Fri Aug 09, 2024 6:43 pm

One remaining. This will be the last for use with a Ford Flathead engine. :)
Top

blauvelt
Posts: 249
Joined: Thu Jan 17, 2019 3:26 pm
First Name: Douglas
Last Name: Ogden
Location: Tucson?

Re: FS RACING INTAKE MANIFOLD

Post by blauvelt » Tue Aug 13, 2024 12:48 pm

Will take the last one.
Top
User avatar

Topic author
Mark Chaffin
Posts: 4343
Joined: Sat Jan 12, 2019 12:11 pm
First Name: Mark
Last Name: Chaffin
* REQUIRED* Type and Year of Model Ts owned: 1911 Speedster, 1927 Lake Roadster
Location: Lake Elsinore
Board Member Since: 2001

Re: FS RACING INTAKE MANIFOLD

Post by Mark Chaffin » Tue Aug 13, 2024 2:52 pm

Sold to Doug. Thank you. :)
Top
Post Reply Previous topicNext topic

Return to “Classifieds - Parts”