A very rare piece, the Ottowa Body company Made Model T bodies from 1919 to 1922:
http://www.mtfca.com/discus/messages/80 ... 1248667985
Sold: Ottawa Body Co. "Autowa" radiator emblem
-
Topic author - Posts: 249
- Joined: Thu Jan 17, 2019 3:26 pm
- First Name: Douglas
- Last Name: Ogden
- Location: Tucson?
Sold: Ottawa Body Co. "Autowa" radiator emblem
Last edited by blauvelt on Sat Aug 17, 2024 9:43 pm, edited 2 times in total.
-
- Posts: 3813
- Joined: Sun Jan 06, 2019 10:56 am
- First Name: Dan
- Last Name: Treace
- * REQUIRED* Type and Year of Model Ts owned: ‘12 open express,'23 cutoff, '27 touring
- Location: North Central FL
- Board Member Since: 2000
- Contact:
Re: FS: Ottawa Body Co. "Autowa" radiator emblem
Doug
Great find, indeed rare piece and in nice condition too. The one on the shell of the Autowa touring was loose, afraid it would come off.
The circular rim back on the emblem was just crimped to the shell, loose, so after repaint, used smear of J-B Weld to secure.
Great find, indeed rare piece and in nice condition too. The one on the shell of the Autowa touring was loose, afraid it would come off.
The circular rim back on the emblem was just crimped to the shell, loose, so after repaint, used smear of J-B Weld to secure.

The best way is always the simplest. The attics of the world are cluttered up with complicated failures. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford
-
Topic author - Posts: 249
- Joined: Thu Jan 17, 2019 3:26 pm
- First Name: Douglas
- Last Name: Ogden
- Location: Tucson?
Re: FS: Ottawa Body Co. "Autowa" radiator emblem
Sold to the gentleman from Las Vegas!
-
Topic author - Posts: 249
- Joined: Thu Jan 17, 2019 3:26 pm
- First Name: Douglas
- Last Name: Ogden
- Location: Tucson?
Re: FS: Ottawa Body Co. "Autowa" radiator emblem
Dan, appreciate your post, it helped solve the mystery!
DanTreace wrote: ↑Sat Aug 17, 2024 9:25 amDoug
Great find, indeed rare piece and in nice condition too. The one on the shell of the Autowa touring was loose, afraid it would come off.
The circular rim back on the emblem was just crimped to the shell, loose, so after repaint, used smear of J-B Weld to secure.![]()