KR Wilson Combination Table
-
RajoRacer
Topic author - Posts: 5172
- Joined: Sun Jan 06, 2019 12:18 pm
- First Name: Steve
- Last Name: Tomaso
- * REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1919 Centerdoor, 1924 TT C-Cab Express, 1925 Racer
- Location: Longbranch, WA
- Board Member Since: 2001
KR Wilson Combination Table
Any interest in JUST the table, gearbox & pullies for this ? I'm keeping the legs for my homemade pan jig. I'll take a reasonable offer & can strap it to a pallet - hate to scrap it !
- Attachments
-
-
-
Dan Hatch
- Posts: 5018
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
Re: KR Wilson Combination Table
If I didn’t already have 3 of them I would be interested.
If you do scrap it, please save the gearbox. I have had people ask me for gears. Dan.
If you do scrap it, please save the gearbox. I have had people ask me for gears. Dan.
-
Gene_French
- Posts: 1027
- Joined: Tue Jan 08, 2019 9:58 am
- First Name: Gene
- Last Name: French
- * REQUIRED* Type and Year of Model Ts owned: 1926 Roadster pkup.
- Location: Nunn, CO
- Board Member Since: 2014
Re: KR Wilson Combination Table
Steve:
sent an email regarding re-purposing the table portion as a machine base for a large spindle bore short bedway lathe ... i would not be using the gear box and this could be sent along to another user ... let me know if this is still available and the freight cost to northern Colorado ... fastenal in Cheyenne is nearby ...Gene French
sent an email regarding re-purposing the table portion as a machine base for a large spindle bore short bedway lathe ... i would not be using the gear box and this could be sent along to another user ... let me know if this is still available and the freight cost to northern Colorado ... fastenal in Cheyenne is nearby ...Gene French
-
RajoRacer
Topic author - Posts: 5172
- Joined: Sun Jan 06, 2019 12:18 pm
- First Name: Steve
- Last Name: Tomaso
- * REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1919 Centerdoor, 1924 TT C-Cab Express, 1925 Racer
- Location: Longbranch, WA
- Board Member Since: 2001
Re: KR Wilson Combination Table
I have an interested party for the gearbox & pulleys Gene - if I can figure out the weight of the table, I'll see about getting a shipping quote.
-
dobro1956
- Posts: 1413
- Joined: Sun Jan 06, 2019 10:13 pm
- First Name: Donnie
- Last Name: Brown
- * REQUIRED* Type and Year of Model Ts owned: 1927 Sport Touring, 1919 Speedster, 1914 Speedster, Wards tractor conversion, non starter 1926 Improved Touring
- Location: Hills of Arkansas
Re: KR Wilson Combination Table
If you still have it I would be interested in the drive plate and clutch handle and 1/2 nuts if you part it out.
-
1925 Touring
- Posts: 759
- Joined: Mon Apr 25, 2022 6:23 pm
- First Name: Austin
- Last Name: Farmer
- * REQUIRED* Type and Year of Model Ts owned: 1922 Touring
- Location: N.W. Illinois
Re: KR Wilson Combination Table
At the risk of sounding nieve, what does the combination table do?
Just a 20 year old who listens to 40 year old music, works on 75 year old airplanes and drives 100 year old cars.
The past is only simple because hindsight is 20/20.
The past is only simple because hindsight is 20/20.
-
TrentB
- Posts: 205
- Joined: Wed Jan 09, 2019 12:19 am
- First Name: Trent
- Last Name: Boggess
- Location: New Hampshire
Re: KR Wilson Combination Table
-
Dan Hatch
- Posts: 5018
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
Re: KR Wilson Combination Table
It is easier to say what a Combination machine doesn’t do.
-
Dennis Fleming
- Posts: 254
- Joined: Mon Jan 07, 2019 9:09 pm
- First Name: Dennis
- Last Name: Fleming
- * REQUIRED* Type and Year of Model Ts owned: 1913 touring,23 TT Express,23 Center Door,15 Touring,22 Speedster,22Coupe
- Location: Luray
- Board Member Since: 2005
Re: KR Wilson Combination Table
Steve ,
I sent you an email.
Thanks and Merry Christmas
I sent you an email.
Thanks and Merry Christmas