Having many irons in the fire and dealing with a few lifestyle altering events (priorities only), I have decided to offer up the RAJO cylinder head business to someone eager to support the hobby and make a modest profit along the way.
Before COVID, I started making another run of 30 cylinder head kits as well as sourcing parts. As of this date, we have enough castings to make 30 plus cylinder head kits. This includes cylinder heads, manifolds, valve covers and block off plates. We also have many new parts to make 100 plus rocker assemblies. 1,000 plus rocker arms, bushings, adjustments bolts and springs. Valve guides, hardware kits, pushrod sets, exhaust header plates, pushrod cup sets, head gaskets and all other gaskets as well. The list of new manufactured parts goes on and on.
Also included are the patterns, CNC tooling fixtures, programming and all related technical drawings. Even the RAJO trademark! All the hard work has been done.
If the prospect of owning this business is of interest to you, give me a call to discuss further.
Mark Chaffin (951)805-0928
FS BUSINESS OPPORTUNITY
-
Mark Chaffin
Topic author - Posts: 4343
- Joined: Sat Jan 12, 2019 12:11 pm
- First Name: Mark
- Last Name: Chaffin
- * REQUIRED* Type and Year of Model Ts owned: 1911 Speedster, 1927 Lake Roadster
- Location: Lake Elsinore
- Board Member Since: 2001
-
Mark Chaffin
Topic author - Posts: 4343
- Joined: Sat Jan 12, 2019 12:11 pm
- First Name: Mark
- Last Name: Chaffin
- * REQUIRED* Type and Year of Model Ts owned: 1911 Speedster, 1927 Lake Roadster
- Location: Lake Elsinore
- Board Member Since: 2001
Re: FS BUSINESS OPPORTUNITY
Spreadsheet completed to include all inventory, patterns, CNC tooling fixtures, CNC Programming, technical drawings, and RAJO Trademark rights. All offered at cost. Call for further if interested.
-
Mark Chaffin
Topic author - Posts: 4343
- Joined: Sat Jan 12, 2019 12:11 pm
- First Name: Mark
- Last Name: Chaffin
- * REQUIRED* Type and Year of Model Ts owned: 1911 Speedster, 1927 Lake Roadster
- Location: Lake Elsinore
- Board Member Since: 2001
-
Mark Chaffin
Topic author - Posts: 4343
- Joined: Sat Jan 12, 2019 12:11 pm
- First Name: Mark
- Last Name: Chaffin
- * REQUIRED* Type and Year of Model Ts owned: 1911 Speedster, 1927 Lake Roadster
- Location: Lake Elsinore
- Board Member Since: 2001
-
Henry K. Lee
- Posts: 5474
- Joined: Sun Jan 06, 2019 11:09 am
- First Name: Henry
- Last Name: Lee
- * REQUIRED* Type and Year of Model Ts owned: Many
- Location: South Pittsburg, TN
- MTFCA Life Member: YES
Re: FS BUSINESS OPPORTUNITY
What a Frickin Opportunity!!!!!!! Wish I did not have so much on my plate and other chapters to write in my life.
-
cwhuntersr
- Posts: 28
- Joined: Mon Nov 20, 2023 3:58 pm
- First Name: CW
- Last Name: Hunter
- * REQUIRED* Type and Year of Model Ts owned: 1927 Roadster Pickup
- Location: Frederick, md
Re: FS BUSINESS OPPORTUNITY
Out of curiosity, what kind of CNC machine would be needed for this? Are we taking a Haas 5 axis or will something smaller work?
-
Mark Chaffin
Topic author - Posts: 4343
- Joined: Sat Jan 12, 2019 12:11 pm
- First Name: Mark
- Last Name: Chaffin
- * REQUIRED* Type and Year of Model Ts owned: 1911 Speedster, 1927 Lake Roadster
- Location: Lake Elsinore
- Board Member Since: 2001
Re: FS BUSINESS OPPORTUNITY
Most any CNC will work. Just slower.
-
cwhuntersr
- Posts: 28
- Joined: Mon Nov 20, 2023 3:58 pm
- First Name: CW
- Last Name: Hunter
- * REQUIRED* Type and Year of Model Ts owned: 1927 Roadster Pickup
- Location: Frederick, md
Re: FS BUSINESS OPPORTUNITY
Thanks Mark - might have to do some research on this.
Just to be sure, these are the same heads as mentioned in this thread? http://www.mtfca.com/discus/messages/29/12413.html
Just to be sure, these are the same heads as mentioned in this thread? http://www.mtfca.com/discus/messages/29/12413.html
-
robertw413
- Posts: 25
- Joined: Tue Jan 05, 2021 2:27 pm
- First Name: robert
- Last Name: wright
- Location: woodbine md
Re: FS BUSINESS OPPORTUNITY
have you figured out a price on the business
-
Mark Chaffin
Topic author - Posts: 4343
- Joined: Sat Jan 12, 2019 12:11 pm
- First Name: Mark
- Last Name: Chaffin
- * REQUIRED* Type and Year of Model Ts owned: 1911 Speedster, 1927 Lake Roadster
- Location: Lake Elsinore
- Board Member Since: 2001
Re: FS BUSINESS OPPORTUNITY
Yes. Inventory has been completed. All at cost. Email me for a list of inventory, patterns, tooling, etc. rajorepo@netscape.net