Phil Jamison
Seeking 1915 Rear Radius Rod
-
mortier
Topic author - Posts: 96
- Joined: Sun Jan 06, 2019 7:16 pm
- First Name: Philip
- Last Name: Jamison
- * REQUIRED* Type and Year of Model Ts owned: 1915 Roadster
- Location: PA
Seeking 1915 Rear Radius Rod
Anyone have a spare 1915 rear radius rod? The threads on one of the rods on my car are stripped.
Phil Jamison
Phil Jamison
-
Karl Von Neumann
- Posts: 708
- Joined: Thu Jan 06, 2022 10:52 am
- First Name: Karl
- Last Name: VonNeumann
- * REQUIRED* Type and Year of Model Ts owned: 1916 touring 1927 tudor 1926 hotrod 1913 speedster (project) 1926 coupe (project)
- Location: Pleasant prairie Wisconsin
- Board Member Since: 2022
Re: Seeking 1915 Rear Radius Rod
Is it a cast iron end on the diff side you should probably just repair it it will be cheaper
Please hold the other 6 voices are taking a vote
-
Allan
- Posts: 6785
- Joined: Sun Jan 06, 2019 7:21 pm
- First Name: Allan
- Last Name: Bennett
- * REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
- Location: Gawler, Australia
Re: Seeking 1915 Rear Radius Rod
Phil, yours is repairable if you want to go down that track. The worn section can be built up with weld, then ground/filed back into round. The good thread on the end gives you a lead-in to then use a die to make a new thread.
I have found 2 or 3 variations in the length of the round section of those rods, so finding a matching one, if that is important to you, may be a little frustrating.
Allan from down under
I have found 2 or 3 variations in the length of the round section of those rods, so finding a matching one, if that is important to you, may be a little frustrating.
Allan from down under