W.T.B. Bennett brake parts. I need a drum and a center mounting widget thing plus anything else you might have.
Email me by the Forum- Thanks, Steve
W.T.B. Bennett brake parts
-
TeveS-Nor Cal
Topic author - Posts: 151
- Joined: Sun Jan 06, 2019 7:11 pm
- First Name: Steve
- Last Name: Straw
- * REQUIRED* Type and Year of Model Ts owned: 1915 and lots of parts
- Location: Penn Valley, CA
-
Mark Gregush
- Posts: 5507
- Joined: Sat Jan 05, 2019 1:57 pm
- First Name: Mark
- Last Name: Gregush
- * REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1948 F2 Ford flat head 6 pickup 3 speed
- Location: Portland Or
- Board Member Since: 1999
Re: W.T.B. Bennett brake parts
Not aware of Bennett using anything other than the stock drum? The equalizer sold by the dealers for converting 26/27 internal brakes to pedal operated brakes should work. Just in case, so everyone is on the same page, are these for small or large drum or TT trucks?
I know the voices aren't real but damn they have some good ideas! 
1925 Cut down pickup
1948 Ford F2 pickup
1925 Cut down pickup
1948 Ford F2 pickup
-
TeveS-Nor Cal
Topic author - Posts: 151
- Joined: Sun Jan 06, 2019 7:11 pm
- First Name: Steve
- Last Name: Straw
- * REQUIRED* Type and Year of Model Ts owned: 1915 and lots of parts
- Location: Penn Valley, CA
Re: W.T.B. Bennett brake parts
I believe I have the first version of the Bennett Brakes. The drums are 2" wide. I need a drum! I have only seen this set up once, on a speedster, along time ago. I bought these parts from Chaffin a few weeks ago. I would post pictures but that is above my pay grade. Thanks, Steve
-
TeveS-Nor Cal
Topic author - Posts: 151
- Joined: Sun Jan 06, 2019 7:11 pm
- First Name: Steve
- Last Name: Straw
- * REQUIRED* Type and Year of Model Ts owned: 1915 and lots of parts
- Location: Penn Valley, CA