early 1910 Hub Cap Wrench
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Vrayfoster
Topic author - Posts: 73
- Joined: Tue Apr 30, 2019 1:05 am
- First Name: Victor
- Last Name: Foster
- * REQUIRED* Type and Year of Model Ts owned: 1910 Touring, 1915 Touring
- Location: Santa Maria, CA
- Board Member Since: 2002
early 1910 Hub Cap Wrench
This was made from picture of the wrench, creating a cad file and sent to a 3D printer shop and printed out of stainless steel for ~$120 . All I know for certain is the hub cap end of the wrench fits and I have pressed pins into the spanner pin holes. I haven't a clue what the rest of the wrench is supposed to fit thus I haven't checked it for proper fitment. The wrench is now painted
-
Mike Silbert
- Posts: 346
- Joined: Sat Feb 08, 2020 11:30 pm
- First Name: Mike
- Last Name: Silbert
- Location: Sykesville Md
- MTFCA Life Member: YES
Re: early 1910 Hub Cap Wrench
I am not an early car expert but here is what the Encyclopedia has to say about this wrench.
It's more of a non company specific universal wrench.
Hopefully someone knows that the features actually fit.
I love the use of technology to solve a problem.
Being printed in metal it should be a functional tool.
If you just wanted a display item and not functional it could be printed in in plastic, body worked, and painted.
Plastic could look fine on display if that is the desire.
Old problem, New solution
Mike
It's more of a non company specific universal wrench.
Hopefully someone knows that the features actually fit.
- Screenshot 2026-03-07 071608.jpg (22.44 KiB) Viewed 27 times
Being printed in metal it should be a functional tool.
If you just wanted a display item and not functional it could be printed in in plastic, body worked, and painted.
Plastic could look fine on display if that is the desire.
Old problem, New solution
Mike