Driveshaft bushing

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
Post Reply Previous topicNext topic

Topic author
CazeaultsModelTs
Posts: 12
Joined: Sat Feb 26, 2022 5:44 pm
First Name: Albert
Last Name: Cazeault
* REQUIRED* Type and Year of Model Ts owned: 1917 Touring 1926 Roadster 1923 farm truck
Location: Danielson CT

Driveshaft bushing

Post by CazeaultsModelTs » Thu Mar 17, 2022 6:30 pm

I cannot get grease through the driveshaft bushing, is it a hole straight through the bushing or is it a channel that delivers it to multiple locations?
Top
User avatar

RajoRacer
Posts: 5176
Joined: Sun Jan 06, 2019 12:18 pm
First Name: Steve
Last Name: Tomaso
* REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1919 Centerdoor, 1924 TT C-Cab Express, 1925 Racer
Location: Longbranch, WA
Board Member Since: 2001

Re: Driveshaft bushing

Post by RajoRacer » Thu Mar 17, 2022 6:39 pm

Depends if it was installed correctly & either an original or a correctly made repro but yes, there is a grease galley.
Top
User avatar

TRDxB2
Posts: 6262
Joined: Tue Jan 08, 2019 4:56 pm
First Name: Frank
Last Name: Brandi
* REQUIRED* Type and Year of Model Ts owned: Speedsters (1919 w 1926 upgrades), 1926 (Ricardo Head)
Location: Moline IL
Board Member Since: 2018

Re: Driveshaft bushing

Post by TRDxB2 » Thu Mar 17, 2022 7:25 pm

I believe the process : The bushing is to be inserted with the oil groves aligned with the oil hole in the torque tube then the hole is drilled an then the busing is reamed & faced.
Attachments
bushing.png
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Top

Topic author
CazeaultsModelTs
Posts: 12
Joined: Sat Feb 26, 2022 5:44 pm
First Name: Albert
Last Name: Cazeault
* REQUIRED* Type and Year of Model Ts owned: 1917 Touring 1926 Roadster 1923 farm truck
Location: Danielson CT

Re: Driveshaft bushing

Post by CazeaultsModelTs » Thu Mar 17, 2022 8:31 pm

It appears that once again this guy installed something incorrectly, the bushing is 180degrees off.
Top

Dropacent
Posts: 3384
Joined: Sun Jan 06, 2019 11:39 am
First Name: Tim
Last Name: Morsher
* REQUIRED* Type and Year of Model Ts owned: 1925TT, 1926 Martin-Parry bodied wagon, 1927 mercury bodied speedster
Location: Norwalk Ohio

Re: Driveshaft bushing

Post by Dropacent » Thu Mar 17, 2022 8:41 pm

It could have spun, too. The repro’s are sometimes a loose fit and need to be glued in.
Top
User avatar

Oldav8tor
Posts: 2246
Joined: Sun Jan 06, 2019 11:39 am
First Name: Tim
Last Name: Juhl
* REQUIRED* Type and Year of Model Ts owned: 1917 Touring
Location: Thumb of Michigan
Board Member Since: 2018

Re: Driveshaft bushing

Post by Oldav8tor » Thu Mar 17, 2022 9:18 pm

If you decide to remove it be careful. More than one guy has sheared off rivets trying to drive it from the far end of the tube. You want to use a puller designed for the purpose.
1917 Touring
1946 Aeronca Champ
1952 Willys M38a1 Jeep (sold 2023)
1953 Ford Jubilee Tractor
Top
User avatar

RajoRacer
Posts: 5176
Joined: Sun Jan 06, 2019 12:18 pm
First Name: Steve
Last Name: Tomaso
* REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1919 Centerdoor, 1924 TT C-Cab Express, 1925 Racer
Location: Longbranch, WA
Board Member Since: 2001

Re: Driveshaft bushing

Post by RajoRacer » Thu Mar 17, 2022 9:36 pm

I just removed & replaced the same bushing that was installed incorrectly - they drilled the hole but it was opposite the grease slot.
Top

Topic author
CazeaultsModelTs
Posts: 12
Joined: Sat Feb 26, 2022 5:44 pm
First Name: Albert
Last Name: Cazeault
* REQUIRED* Type and Year of Model Ts owned: 1917 Touring 1926 Roadster 1923 farm truck
Location: Danielson CT

Re: Driveshaft bushing

Post by CazeaultsModelTs » Fri Mar 18, 2022 2:11 pm

Dropacent wrote: ↑
Thu Mar 17, 2022 8:41 pm
 It could have spun, too. The repro’s are sometimes a loose fit and need to be glued in.
It could have spun but everything this guy installed has been incorrect so far
Top
User avatar

Sean Butler
Posts: 170
Joined: Sun Jan 06, 2019 12:22 pm
First Name: Sean
Last Name: Butler
* REQUIRED* Type and Year of Model Ts owned: 1911 Touring
Location: Huntington Beach, CA

Re: Driveshaft bushing

Post by Sean Butler » Fri Mar 18, 2022 6:14 pm

You have to appreciate consistency... :(
Sean Butler
Huntington Beach, CA
Top

Les Schubert
Posts: 1358
Joined: Thu Jan 10, 2019 5:47 pm
First Name: Les
Last Name: Schubert
* REQUIRED* Type and Year of Model Ts owned: 27 roadster 13 touring
Location: Calgary

Re: Driveshaft bushing

Post by Les Schubert » Fri Mar 18, 2022 6:46 pm

Considering how much oil most T’s leak by the ball cap I wouldn’t think it is a big deal. I haven’t greased that bushing in 45 years.
Top
User avatar

TRDxB2
Posts: 6262
Joined: Tue Jan 08, 2019 4:56 pm
First Name: Frank
Last Name: Brandi
* REQUIRED* Type and Year of Model Ts owned: Speedsters (1919 w 1926 upgrades), 1926 (Ricardo Head)
Location: Moline IL
Board Member Since: 2018

Re: Driveshaft bushing

Post by TRDxB2 » Fri Mar 18, 2022 9:17 pm

Les Schubert wrote: ↑
Fri Mar 18, 2022 6:46 pm
 Considering how much oil most T’s leak by the ball cap I wouldn’t think it is a big deal. I haven’t greased that bushing in 45 years.
I'm with you. But your suppose to put grease in the Ball Cap to lube the u-joint and oil to lube the drive shaft bushing. I think that theory was that the oil would dilute the grease seeping into the busing providing the intended consistency.
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Top
Post Reply Previous topicNext topic

Return to “General Discussion Forum”