Reamer lubricant, water- or oil-based?

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
Post Reply Previous topicNext topic
User avatar

Topic author
Mark Nunn
Posts: 1241
Joined: Mon Jan 07, 2019 8:01 am
First Name: Mark
Last Name: Nunn
* REQUIRED* Type and Year of Model Ts owned: 1926 Runabout
Location: Bennington, NE
Board Member Since: 2017

Reamer lubricant, water- or oil-based?

Post by Mark Nunn » Tue Feb 13, 2024 9:39 am

I have always used oil-based when reaming. I'm reaming valve guides and decided to try water based. The company I work for uses water based in our cutting machinery. I'm not happy with progress so far. I ruined my reamer when I hit a hard spot in the casting. Before I finish. What do you all prefer and why?
Top

TXGOAT2
Posts: 7391
Joined: Sun Feb 14, 2021 10:08 pm
First Name: Pat
Last Name: McNallen
* REQUIRED* Type and Year of Model Ts owned: 1926-7 roadster
Location: Graham, Texas
Board Member Since: 2021

Re: Reamer lubricant, water- or oil-based?

Post by TXGOAT2 » Tue Feb 13, 2024 10:13 am

Old-fashioned oil-based thread cutting oil ought to work.
If you hit a sand inclusion in the block, it wouldn't matter much what lubricant you used.
I'd guess water-base lubricants are meant for modern, insert-type cutting tools. Tool steel cutters probably work best with an oil base lube.
Top

Dan McEachern
Posts: 1400
Joined: Sun Jan 06, 2019 11:08 am
First Name: DAN
Last Name: MCEACHERN
* REQUIRED* Type and Year of Model Ts owned: too many. '14 touring, 2 depot hacks, 2 speedsters
Location: ALAMEDA,CA,USA

Re: Reamer lubricant, water- or oil-based?

Post by Dan McEachern » Tue Feb 13, 2024 2:15 pm

Cast iron= dry.
Top

Art M
Posts: 964
Joined: Wed Jun 19, 2019 12:57 pm
First Name: Art
Last Name: Mirtes
* REQUIRED* Type and Year of Model Ts owned: 1923 Touring
Location: Huron, Ohio
Board Member Since: 2016

Re: Reamer lubricant, water- or oil-based?

Post by Art M » Tue Feb 13, 2024 5:37 pm

Three years ago I reamer the valve guides dry and had no problem. Definitely don't use motor oil. It's important to control the reamer alignment.

Art Mirtes
Top

jiminbartow
Posts: 2434
Joined: Sun Jan 06, 2019 10:55 pm
First Name: James
Last Name: Patrick
* REQUIRED* Type and Year of Model Ts owned: 1926 Coupe
Location: Bartow, FL
Board Member Since: 2001

Re: Reamer lubricant, water- or oil-based?

Post by jiminbartow » Tue Feb 13, 2024 5:52 pm

Our machinist used water soluble oil. Oil that would mix with water. It would circulate through the machine and pass through a strainer. It went much farther and was just as good as regular lubricating oil.
Top
User avatar

Topic author
Mark Nunn
Posts: 1241
Joined: Mon Jan 07, 2019 8:01 am
First Name: Mark
Last Name: Nunn
* REQUIRED* Type and Year of Model Ts owned: 1926 Runabout
Location: Bennington, NE
Board Member Since: 2017

Re: Reamer lubricant, water- or oil-based?

Post by Mark Nunn » Wed Feb 14, 2024 8:23 am

Dan McEachern wrote: ↑
Tue Feb 13, 2024 2:15 pm
 Cast iron= dry.
Dan, Scott Conger told me the same thing. I was unaware that cast iron should be dry. Thank you for your input.
Top
User avatar

Topic author
Mark Nunn
Posts: 1241
Joined: Mon Jan 07, 2019 8:01 am
First Name: Mark
Last Name: Nunn
* REQUIRED* Type and Year of Model Ts owned: 1926 Runabout
Location: Bennington, NE
Board Member Since: 2017

Re: Reamer lubricant, water- or oil-based?

Post by Mark Nunn » Wed Feb 14, 2024 8:36 am

Well there it is in my Machinery's Handbook. Cast iron should be dry. I should have looked there first. Thanks to all.
Top

tiredfarmer
Posts: 129
Joined: Thu Apr 09, 2020 11:29 am
First Name: leonard
Last Name: simunek
* REQUIRED* Type and Year of Model Ts owned: 1926 touring. 1931 model a pickup, 1947 willys cj2a
Location: waukomis, ok

Re: Reamer lubricant, water- or oil-based?

Post by tiredfarmer » Wed Feb 14, 2024 5:53 pm

Do you use cutting oil when reaming bronze bushings or can you ream them dry?
Top
User avatar

Topic author
Mark Nunn
Posts: 1241
Joined: Mon Jan 07, 2019 8:01 am
First Name: Mark
Last Name: Nunn
* REQUIRED* Type and Year of Model Ts owned: 1926 Runabout
Location: Bennington, NE
Board Member Since: 2017

Re: Reamer lubricant, water- or oil-based?

Post by Mark Nunn » Wed Feb 14, 2024 9:34 pm

Bronze should have soluable oil.
Top

tiredfarmer
Posts: 129
Joined: Thu Apr 09, 2020 11:29 am
First Name: leonard
Last Name: simunek
* REQUIRED* Type and Year of Model Ts owned: 1926 touring. 1931 model a pickup, 1947 willys cj2a
Location: waukomis, ok

Re: Reamer lubricant, water- or oil-based?

Post by tiredfarmer » Thu Feb 15, 2024 7:44 am

OK I'm not very bright. What is soluable oil?
Top
User avatar

Topic author
Mark Nunn
Posts: 1241
Joined: Mon Jan 07, 2019 8:01 am
First Name: Mark
Last Name: Nunn
* REQUIRED* Type and Year of Model Ts owned: 1926 Runabout
Location: Bennington, NE
Board Member Since: 2017

Re: Reamer lubricant, water- or oil-based?

Post by Mark Nunn » Thu Feb 15, 2024 9:39 am

Soluble Oil is a chlorine-free, water miscible metalworking fluid designed to emulsify easily and form a long-lasting, stable emulsion when mixed with water
Top

jiminbartow
Posts: 2434
Joined: Sun Jan 06, 2019 10:55 pm
First Name: James
Last Name: Patrick
* REQUIRED* Type and Year of Model Ts owned: 1926 Coupe
Location: Bartow, FL
Board Member Since: 2001

Re: Reamer lubricant, water- or oil-based?

Post by jiminbartow » Thu Feb 15, 2024 9:51 am

Water soluble oil. Oil that mixes with water. Designed for providing lubricant and cooling properties to machine work that would overheat without it. Makes the lubricating oil thinner and allows it to go farther making the job more economical.


Just one example. There are all types of brands.
IMG_8537.jpeg
Top

tiredfarmer
Posts: 129
Joined: Thu Apr 09, 2020 11:29 am
First Name: leonard
Last Name: simunek
* REQUIRED* Type and Year of Model Ts owned: 1926 touring. 1931 model a pickup, 1947 willys cj2a
Location: waukomis, ok

Re: Reamer lubricant, water- or oil-based?

Post by tiredfarmer » Thu Feb 15, 2024 5:49 pm

OK Thanks a lot for telling an old dummy guys. I always learn something on this forum.
Top

greenacres36
Posts: 156
Joined: Sun Sep 27, 2020 3:50 pm
First Name: Brian
Last Name: Williams
* REQUIRED* Type and Year of Model Ts owned: 1926 Tudor, 1915 Runabout
Location: Prospect, Ohio

Re: Reamer lubricant, water- or oil-based?

Post by greenacres36 » Fri Feb 16, 2024 9:42 am

I agree usually cast-iron is cut dry. But sometimes I would use something like WD-40 or PB blaster.
Top
Post Reply Previous topicNext topic

Return to “General Discussion Forum”