I came across these images of skis and would like to build my own, but I need help finding drawings for them.
Credit for the images goes to Chris Bamford, I found the images here: https://www.mtfca.com/discus/messages/8 ... POST183657
Question about skis
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Doc
Topic author - Posts: 1
- Joined: Wed Aug 20, 2025 7:59 am
- First Name: Julius
- Last Name: Raab
- * REQUIRED* Type and Year of Model Ts owned: 1924 Touring
- Location: Lausanne, Vaud
Question about skis
- Attachments
-
-
- Close up of one of the skis
-
Dan Hatch
- Posts: 5103
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
Re: Question about skis
Look up the snowmobile company making the reproduction kits.
-
Humblej
- Posts: 1987
- Joined: Sun Jan 06, 2019 12:23 pm
- First Name: Jeff
- Last Name: Humble
- * REQUIRED* Type and Year of Model Ts owned: 1926 Canadian coupe, 1924 TT C-cab, 1924 runabout
- Location: Charlevoix, Mi
- Board Member Since: 2006
Re: Question about skis
You will not find drawings for them. You will need to reverse engineer them from the pictures. NHsnowcar has a lot of repo parts for Snowbird and Snowmobile. Those are neither brand.
-
Dennis Prince
- Posts: 404
- Joined: Sun Jan 06, 2019 2:36 pm
- First Name: Dennis
- Last Name: Prince
- * REQUIRED* Type and Year of Model Ts owned: 1)24 touring 2)25 TT's 1)26 roadster 2)26 tourings 1) 26coupe 1)27 funster 1)28 A pick up
- Location: Madras Oregon
- Board Member Since: 1999
Re: Question about skis
This is what I built with some junk wheels, broken Model A springs, old bed frame and some sheet stainless that I found at the dump. The hard part is making sure that everything is parallel.