making thread protecter knockers

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules

Topic author
Dennis_Brown
Posts: 50
Joined: Wed Jan 09, 2019 10:14 pm
First Name: Dennis
Last Name: Brown
Location: Spring Hill Fl
MTFCA Number: 21458

making thread protecter knockers

Post by Dennis_Brown » Sun Sep 15, 2019 10:26 pm

I do not know where to get high nuts since I moved to Florida but a high nut is about half again as tall as a regular nut and is much harder.they come in diameters from 5/16 on up. Easy to weld a cap to and still have room for an open end wrench. You can screw them down further on a threaded area and have less chance of bending that item if you thread it down to just above touching. If not tall enough put a bolt through it and weld 2 nuts together.
Fastenal may have them but I, m not sure.


Rich Bingham
Posts: 721
Joined: Sun Jan 06, 2019 11:23 am
First Name: Rich
Last Name: Bingham
Location: Blackfoot, Idaho

Re: making thread protecter knockers

Post by Rich Bingham » Mon Sep 16, 2019 9:40 am

They're called "coupling nuts". A quick search shows that Lowes, Home Despot and Fastenall carry them.
"Get a horse !"


Humblej
Posts: 299
Joined: Sun Jan 06, 2019 12:23 pm
First Name: Jeff
Last Name: Humble
Location: Charlevoix, Mi
Board Member Since: 2006

Re: making thread protecter knockers

Post by Humblej » Mon Sep 16, 2019 10:49 am

Sounds like a grade 9 nut, yes, available at fastenal.

Post Reply Previous topicNext topic