New trick (to me at least)
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 397
- Joined: Sun Jan 06, 2019 2:36 pm
- First Name: Dennis
- Last Name: Prince
- * REQUIRED* Type and Year of Model Ts owned: 1)24 touring 2)25 TT's 1)26 roadster 2)26 tourings 1) 26coupe 1)27 funster 1)28 A pick up
- Location: Madras Oregon
- Board Member Since: 1999
New trick (to me at least)
Everyone else probably already knows this trick but just in case I thought I would share it. One of my least favorite jobs on my T has always been mounting the radiator and trying to get the mount studs up high enough to get everything on them and then the nut, so what I figured out was I took a piece of 5/16 fuel hose, cut off about 1/2 inch and pulled the stud up and wedged the hose under it before putting any of the pieces on top, then just put it together.
-
- Posts: 4635
- Joined: Tue Jan 08, 2019 1:39 pm
- First Name: Norman
- Last Name: Kling
- Location: Alpine California
Re: New trick (to me at least)
Sounds like a good idea. In the past I have been putting a block of wood, or a tool the right height under the stud. Your idea seems like a good one and you can even leave it in place if you want to.
Norm
Norm