Installing brass windshield channel
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 365
- Joined: Sat Jan 19, 2019 7:44 pm
- First Name: Bill
- Last Name: Elliott
- * REQUIRED* Type and Year of Model Ts owned: 1916 Model T Touring
- Location: Michigan
- Board Member Since: 2006
Installing brass windshield channel
Does anyone have some advice on how to install the brass channel for the windshield on the early brass T's? I have an all brass, Mezger Automatic windshield for my 1910 and I need new safety glass. I bought the brass channel kit, but there's no instructions and I don't have the old channel that was on the frame. Any advice would be greatly appreciated!
-
- Posts: 1230
- Joined: Sun Jan 06, 2019 6:51 pm
- First Name: Mike
- Last Name: Bird
- * REQUIRED* Type and Year of Model Ts owned: 1912 Delivery Car
- Location: Goshen IN
Re: Installing brass windshield channel
Bill,
Some guys have had some luck using the method outlined here.
http://www.mtfca.com/cgi-bin/discus/sho ... st=1011185
Some guys have had some luck using the method outlined here.
http://www.mtfca.com/cgi-bin/discus/sho ... st=1011185