I have a brass Stewart speedo cable that measures 62 3/4" from end to end including the ends. I'm looking to get a cable kit from Langs for the inside and was curious to know if the 5ft cable is the way to go or do I need the 6 ft? Do you have to do anything with the inside cable to get it together (end pieces)? Does the 5 ft mean its just the cable length not including the end pieces? Anyone done this job that could offer some insight?
Thanks
Mike
Stewart Speedometer Cable Help
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
KWTownsend
- Posts: 1382
- Joined: Mon Jan 07, 2019 6:51 pm
- First Name: Keith
- Last Name: Townsend
- * REQUIRED* Type and Year of Model Ts owned: late 1911 touring, 1915 runabout, 1919 touring, brass speedster
- Location: Gresham, Orygun
- MTFCA Life Member: YES
- Board Member Since: 1999
Re: Stewart Speedometer Cable Help
Mike,
I believe it should be 48"
Keith
I believe it should be 48"
Keith