Torque on mains.

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
Post Reply Previous topicNext topic

Topic author
Mel King
Posts: 96
Joined: Thu Jan 10, 2019 12:23 pm
First Name: Melvin
Last Name: King
Location: Portsmouth VA

Torque on mains.

Post by Mel King » Sat May 04, 2019 11:08 am

I have seen it somewhere ,but I can not find it now. Is the torque for the mains 45 foot lbs? :?: :roll:
Top

Dan McEachern
Posts: 1402
Joined: Sun Jan 06, 2019 11:08 am
First Name: DAN
Last Name: MCEACHERN
* REQUIRED* Type and Year of Model Ts owned: too many. '14 touring, 2 depot hacks, 2 speedsters
Location: ALAMEDA,CA,USA

Re: Torque on mains.

Post by Dan McEachern » Sat May 04, 2019 11:16 am

That's probably a little on the low side. I've used 60 ft-lbs for many years.
Top
User avatar

Ruxstel24
Posts: 2345
Joined: Sun Jan 06, 2019 11:25 am
First Name: Dave
Last Name: Hanlon
* REQUIRED* Type and Year of Model Ts owned: 24 Touring car
Location: NE Ohio
Board Member Since: 2018

Re: Torque on mains.

Post by Ruxstel24 » Sat May 04, 2019 11:28 am

In this post, Herm recommends 80ftlbs. And tighten to align keyhole.

http://www.mtfca.com/discus/messages/70 ... 1506991281
Top
User avatar

Mark Gregush
Posts: 5370
Joined: Sat Jan 05, 2019 1:57 pm
First Name: Mark
Last Name: Gregush
* REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1948 F2 Ford flat head 6 pickup 3 speed
Location: Portland Or
Board Member Since: 1999

Re: Torque on mains.

Post by Mark Gregush » Sat May 04, 2019 11:33 am

Same as the Model A, 80.
I know the voices aren't real but damn they have some good ideas! :shock:

1925 Cut down pickup
1948 Ford F2 pickup
Top

Philip
Posts: 239
Joined: Sun Jan 06, 2019 12:09 pm
First Name: Philip
Last Name: Thompson
* REQUIRED* Type and Year of Model Ts owned: 1924 touring
Location: Graham NC

Re: Torque on mains.

Post by Philip » Sun May 05, 2019 10:36 am

Since Ford gave no torque specs I just use the
Sae. Chart that goes by bolt size and pitch
Top
Post Reply Previous topicNext topic

Return to “General Discussion Forum”