I need links like the bottom ones for a Corbin sppeedo drive. The connecting links are just like the Stewart ones, but rather than the two hooked ends being on the same plane, they are at 90 degrees to each other. The intermediate links are castings, the annular rings around them acting as bearings within the casing.
Wanted, speedo cable parts.
-
Allan
Topic author - Posts: 6609
- Joined: Sun Jan 06, 2019 7:21 pm
- First Name: Allan
- Last Name: Bennett
- * REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
- Location: Gawler, Australia
Wanted, speedo cable parts.
I need 16" of speedo cable links like those on the bottom of the photo. The top links are standard Stewart fare.
I need links like the bottom ones for a Corbin sppeedo drive. The connecting links are just like the Stewart ones, but rather than the two hooked ends being on the same plane, they are at 90 degrees to each other. The intermediate links are castings, the annular rings around them acting as bearings within the casing. Allan from down under.
I need links like the bottom ones for a Corbin sppeedo drive. The connecting links are just like the Stewart ones, but rather than the two hooked ends being on the same plane, they are at 90 degrees to each other. The intermediate links are castings, the annular rings around them acting as bearings within the casing. Allan from down under.