Fender mounting hardware
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
browning
Topic author - Posts: 143
- Joined: Wed Jan 22, 2020 4:34 pm
- First Name: David
- Last Name: Kahle
- * REQUIRED* Type and Year of Model Ts owned: '26 coupe, '26 touring, ‘14 Staude tractor conversion, '27 coupe, '19 roadster, ’15 speedster, '14 touring
- Location: Leeper, Pa.
Fender mounting hardware
I am considering replacing the fenders etc. on my 1919 Roadster with new and hate to strip the mounting hardware from the existing parts since they are in pretty good shape (no rust) and could be used by others if unmolested. Is there a place where replacement mounting hardware can be purchased, new or used. I don't think I have ever seen it advertised.
-
John kuehn
- Posts: 4433
- Joined: Sun Jan 06, 2019 8:00 pm
- First Name: John
- Last Name: Kuehn
- * REQUIRED* Type and Year of Model Ts owned: 19 Roadster, 21 Touring, 24 Coupe
- Location: Texas
Re: Fender mounting hardware
Did you mean the fender brackets? If you did I don’t think the new T fenders that are available have the fender mounting brackets that are rivited on.
Since they don’t have the brackets you will need to remove your old ones and remount them on the new fenders. That’s what T owners do when they buy a new fender.
And yes no one reproduces the fender brackets. Or at least they didn’t use to. Just because they are rusted up people will buy the brackets. In some places they are hard to come by.
Since they don’t have the brackets you will need to remove your old ones and remount them on the new fenders. That’s what T owners do when they buy a new fender.
And yes no one reproduces the fender brackets. Or at least they didn’t use to. Just because they are rusted up people will buy the brackets. In some places they are hard to come by.
-
TRDxB2
- Posts: 6262
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedsters (1919 w 1926 upgrades), 1926 (Ricardo Head)
- Location: Moline IL
- Board Member Since: 2018
Re: Fender mounting hardware
no repro's except for brass-erabrowning wrote: ↑Thu Jan 23, 2025 4:32 pmI am considering replacing the fenders etc. on my 1919 Roadster with new and hate to strip the mounting hardware from the existing parts since they are in pretty good shape (no rust) and could be used by others if unmolested. Is there a place where replacement mounting hardware can be purchased, new or used. I don't think I have ever seen it advertised.
eBay, forum, Facebook for parts or used trash fenders
Could find someone to trade
Red circled hard to find
Yellow circled much easier
- Attachments
-
- 740492.jpg (84.02 KiB) Viewed 3135 times
Last edited by TRDxB2 on Thu Jan 23, 2025 6:54 pm, edited 1 time in total.
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger
-
speedytinc
- Posts: 4725
- Joined: Fri Feb 12, 2021 12:24 pm
- First Name: john
- Last Name: karvaly
- * REQUIRED* Type and Year of Model Ts owned: 14/15 wide track roadster. 23 touring, 27 roadster pickup, 20ish rajo touring
- Location: orange, ca
- Board Member Since: 2020
Re: Fender mounting hardware
Put in a WTB for fender mounting brackets.
Parts sellers have junkie fenders that are only good for the mounting plates.
Parts sellers have junkie fenders that are only good for the mounting plates.
-
NoelChico
- Posts: 266
- Joined: Tue Jan 08, 2019 10:42 pm
- First Name: Noel
- Last Name: Chicoine
- * REQUIRED* Type and Year of Model Ts owned: 1920 roadster, 1923 Touring, 1926 Coupe
- Location: Pierre, South Dakota
- Board Member Since: 2005
Re: Fender mounting hardware
FYI, Sacramento Vintage Ford has them for the 13-16 fenders. They're backordered at present, but they told me they should have them in 2-3 weeks. Noel
-
John kuehn
- Posts: 4433
- Joined: Sun Jan 06, 2019 8:00 pm
- First Name: John
- Last Name: Kuehn
- * REQUIRED* Type and Year of Model Ts owned: 19 Roadster, 21 Touring, 24 Coupe
- Location: Texas
Re: Fender mounting hardware
You might call Lang’s. They have a supply of good and NOS T parts. The top fender brackets are the same for L and R. But the corner brackets aren’t. They have to be L or R.
-
Allan
- Posts: 6609
- Joined: Sun Jan 06, 2019 7:21 pm
- First Name: Allan
- Last Name: Bennett
- * REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
- Location: Gawler, Australia
Re: Fender mounting hardware
The top fender brackets with which I am familiar are left and right. The mounting holes in the fenders may be the same pattern, but one of the brackets would need to be rotated to align with the holes, putting the mounting slot either in front or behind the frame iron.
Allan from down under.
Allan from down under.