WTB Truss rods.
-
Dollisdad
Topic author - Posts: 3707
- Joined: Wed Jan 16, 2019 10:13 pm
- First Name: Tom
- Last Name: Rootlieb
- Location: Ohio
WTB Truss rods.
Need a pr. of 1910-15, 7/16” truss rods that run between the running board brackets. Thanks for your help.
-
Tim D
- Posts: 211
- Joined: Fri Jun 05, 2020 7:48 pm
- First Name: Tim
- Last Name: Dickson
- * REQUIRED* Type and Year of Model Ts owned: 1912 speedster 1911 Torepdo
- Location: wi
Re: WTB Truss rods.
I couldn't find any either. had to make a set.
-
TRDxB2
- Posts: 6435
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedsters (1919 w 1926 upgrades), 1926 (Ricardo Head)
- Location: Moline IL
- Board Member Since: 2018
Re: WTB Truss rods.
Measured different. & only the straight rod
Last edited by TRDxB2 on Wed Jul 16, 2025 3:14 pm, edited 1 time in total.
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger
-
DanTreace
- Posts: 3962
- Joined: Sun Jan 06, 2019 10:56 am
- First Name: Dan
- Last Name: Treace
- * REQUIRED* Type and Year of Model Ts owned: '23 cutoff pickup, '27 touring
- Location: North Central FL
- Board Member Since: 2000
- Contact:
Re: WTB Truss rods.
Lang’s website lists these. Guess they are in stock?
Number: 4816-17A
Per Car: 1
Year: 1910-1915
Condition: New
Price: $74.95 pair
Number: 4816-17A
Per Car: 1
Year: 1910-1915
Condition: New
Price: $74.95 pair
The best way is always the simplest. The attics of the world are cluttered up with complicated failures. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford
-
Dan Hatch
- Posts: 5282
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
Re: WTB Truss rods.
I may still have NOS ones. I can look Thursday, got go to LA tomorrow.
Tom email me if you want me to look. Dan
Tom email me if you want me to look. Dan
-
Charlie_26_TT_Ccab
- Posts: 215
- Joined: Sun Jan 06, 2019 7:53 pm
- First Name: Charlie
- Last Name: Coleman
- * REQUIRED* Type and Year of Model Ts owned: 1926 TT C Cab Stakebed Truck
- Location: Redwood Valley, Ca.
- Board Member Since: 2018
Re: WTB Truss rods.
Chaffins has them in stock too ! Saw them
when I visited Mark before the January
Turlock swap meet.
when I visited Mark before the January
Turlock swap meet.
-
GregDeK
- Posts: 36
- Joined: Tue Jan 30, 2024 12:02 pm
- First Name: Gregory
- Last Name: DeKeyzer
- * REQUIRED* Type and Year of Model Ts owned: 1923, aka Dust Bowl Special, very low mileage original 1915 roadster & an IKEA truck (IKEA because I have to put it together...)
- Location: New Iberia, LA
Re: WTB Truss rods.
I had the same problem. Spoke to someone, (don’t remember whether Lang’s or Snyder’s), checked length of what they had - may have been for a year earlier than 15. Sorry to be so vague, but I don’t remember, it was a while back.
Bottom line is that I got what they had, there was only about 1/2” difference in length. The rod didn’t pass the nut when installed, but on well enough not to cause an issue - especially with lock tite.
I was prepared to attempt to make a set but the rod is an odd size and I was fairly certain I wouldn’t get the bends exactly correct.
For whatever it’s worth… Hope it helps.
Bottom line is that I got what they had, there was only about 1/2” difference in length. The rod didn’t pass the nut when installed, but on well enough not to cause an issue - especially with lock tite.
I was prepared to attempt to make a set but the rod is an odd size and I was fairly certain I wouldn’t get the bends exactly correct.
For whatever it’s worth… Hope it helps.