Ferrachute P2 punch press

Post parts wanted or for sale here

Topic author
Kevin Pharis
Posts: 1559
Joined: Thu Jan 10, 2019 3:54 pm
First Name: Kevin
Last Name: Pharis
Location: Sacramento CA
Contact:

Ferrachute P2 punch press

Post by Kevin Pharis » Thu May 22, 2025 12:07 am

Making room for bigger and better toys! This is kinda T related, as it regularly dimples new wire wheel rims, and may have even made T parts when it was new. 20 Tons of fun to annoy your neighbors with! Nothing says “it’s Sunday” like the “ka-chunk ka-chunk ka-chunk” of a punch press on a calm morning. You can even tell em good nite too. First one here with a $1 bill and trailer can have it! Approximately 2k pounds and 6.5’ tall
IMG_3077.jpeg
IMG_3078.jpeg
I don’t actually expect anyone to want this thing. Just wanted to give it one last chance at life. Gonna be a shame to scrap it… but it can’t stay here!


Jerry VanOoteghem
Posts: 4082
Joined: Sun Jan 06, 2019 4:06 pm
First Name: Jerry
Last Name: Van
Location: S.E. Michigan

Re: Ferrachute P2 punch press

Post by Jerry VanOoteghem » Thu May 22, 2025 11:14 am

Advertise it here. These guys will most likely jump at it...

https://www.owwm.org/viewforum.php?f=84


Topic author
Kevin Pharis
Posts: 1559
Joined: Thu Jan 10, 2019 3:54 pm
First Name: Kevin
Last Name: Pharis
Location: Sacramento CA
Contact:

Re: Ferrachute P2 punch press

Post by Kevin Pharis » Fri May 23, 2025 7:58 pm

Just read on Wikipedia that Ford bought bout 50 Ferrachute presses in 1910, and 500 more later on, this could have been one of them! A must have for the ultimate collection of Ford memorabilia!

User avatar

henryford2
Posts: 811
Joined: Sun Jan 06, 2019 4:14 pm
First Name: Joseph
Last Name: Andulics
* REQUIRED* Type and Year of Model Ts owned: 1926 Fordor, 1926 Truck, 1927 Roadster GOW, RAJO Sprint car
Location: North Ridgeville, OH
Contact:

Re: Ferrachute P2 punch press

Post by henryford2 » Sat May 24, 2025 7:28 am

In my working career I probably scrapped over 250 tons of the old "dog" clutch stamping presses most for not meeting current OSHA standards for press safety. The only advice I can offer to avoid liability issues is to take the motor off and sell it as a non operating press for parts. JMHO
Last edited by henryford2 on Sat May 24, 2025 11:15 am, edited 1 time in total.


Dan Hatch
Posts: 5013
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama

Re: Ferrachute P2 punch press

Post by Dan Hatch » Sat May 24, 2025 10:16 am

Looks more like a power hammer for a forge shop.
Wish I had a dollar for every RoussellE OBI I have worked on. I could buy any T I wanted. Dan


Topic author
Kevin Pharis
Posts: 1559
Joined: Thu Jan 10, 2019 3:54 pm
First Name: Kevin
Last Name: Pharis
Location: Sacramento CA
Contact:

Re: Ferrachute P2 punch press

Post by Kevin Pharis » Sat May 24, 2025 11:31 am

The Ferrachute was working ok before I removed the motor and electrical. If someone wants the press, they can have it all. Just didn’t want to scrap the good 5hp motor and foot pedal. The catch pins are worn, but it’s too big for me to take apart to fix, and now it’s in the way.

The RoussellE 1A seen in the pic is replacing the Ferrachute. Will be plenty of press for what I do, and is a much more serviceable size. My neighbors will no doubt miss its Sunday morning serenades, but I have to make room for bigger and better toys!


Topic author
Kevin Pharis
Posts: 1559
Joined: Thu Jan 10, 2019 3:54 pm
First Name: Kevin
Last Name: Pharis
Location: Sacramento CA
Contact:

Re: Ferrachute P2 punch press

Post by Kevin Pharis » Sun Jun 01, 2025 12:56 am

Runnin out of time…


Topic author
Kevin Pharis
Posts: 1559
Joined: Thu Jan 10, 2019 3:54 pm
First Name: Kevin
Last Name: Pharis
Location: Sacramento CA
Contact:

Re: Ferrachute P2 punch press

Post by Kevin Pharis » Thu Jul 17, 2025 9:49 pm

Better hurry! Tomorrow morning the bigger and better toy will be here, and the punch press will be gone…


Dan McEachern
Posts: 1400
Joined: Sun Jan 06, 2019 11:08 am
First Name: DAN
Last Name: MCEACHERN
* REQUIRED* Type and Year of Model Ts owned: too many. '14 touring, 2 depot hacks, 2 speedsters
Location: ALAMEDA,CA,USA

Re: Ferrachute P2 punch press

Post by Dan McEachern » Fri Jul 18, 2025 12:19 am

Drum Roll......................!! Congratulations!!

Post Reply Previous topicNext topic