Compression test. Starter vs crank

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules

Topic author
bobt
Posts: 289
Joined: Tue Aug 13, 2019 5:43 am
First Name: Robert
Last Name: Thompson
* REQUIRED* Type and Year of Model Ts owned: 1915 touring 1926 roadster
Location: virginia

Compression test. Starter vs crank

Post by bobt » Thu Jul 31, 2025 2:38 pm

Has anyone done a cylinder compression test recording electric starter vs crank psi? I'm losing my strength and find it hard to get over TDC even with the other plugs removed.


big2bird
Posts: 492
Joined: Mon Sep 14, 2020 10:57 pm
First Name: Jeffrey
Last Name: Hausey
* REQUIRED* Type and Year of Model Ts owned: Early 23 Touring
Location: Anaheim, Ca.
Board Member Since: 2020

Re: Compression test. Starter vs crank

Post by big2bird » Thu Jul 31, 2025 2:39 pm

Jack up one wheel.


TXGOAT2
Posts: 7462
Joined: Sun Feb 14, 2021 10:08 pm
First Name: Pat
Last Name: McNallen
* REQUIRED* Type and Year of Model Ts owned: 1926-7 roadster
Location: Graham, Texas
Board Member Since: 2021

Re: Compression test. Starter vs crank

Post by TXGOAT2 » Thu Jul 31, 2025 2:44 pm

I believe you'd get good results using a starter. Most compression tests are done using a starter. Unless the compression is very low in all cylinders, you're looking for significantly different readings from cylinder to cylinder as much as for the peak pressure. I'd expect that testing each cylinder on the starter with the other 3 plugs still in place would give results very similar to a brisk manual cranking with the other 3 plugs out.

User avatar

RajoRacer
Posts: 5195
Joined: Sun Jan 06, 2019 12:18 pm
First Name: Steve
Last Name: Tomaso
* REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1919 Centerdoor, 1924 TT C-Cab Express, 1925 Racer
Location: Longbranch, WA
Board Member Since: 2001

Re: Compression test. Starter vs crank

Post by RajoRacer » Thu Jul 31, 2025 2:55 pm

Just did a '15 yesterday - hand cranked, jacked up, plugs out & throttle wide open - I'm hitting 70 so I'm starting to feel it too !


Kevin Pharis
Posts: 1573
Joined: Thu Jan 10, 2019 3:54 pm
First Name: Kevin
Last Name: Pharis
Location: Sacramento CA
Contact:

Re: Compression test. Starter vs crank

Post by Kevin Pharis » Thu Jul 31, 2025 11:38 pm

When hand cranking have to spin the engine several revolutions to get a reading anywhere close to a starter. Starter should get you 50-60psi, pulling over 1/4 turn by hand will show bout 35, spinning by hand probably bout 45-50.

User avatar

RajoRacer
Posts: 5195
Joined: Sun Jan 06, 2019 12:18 pm
First Name: Steve
Last Name: Tomaso
* REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1919 Centerdoor, 1924 TT C-Cab Express, 1925 Racer
Location: Longbranch, WA
Board Member Since: 2001

Re: Compression test. Starter vs crank

Post by RajoRacer » Thu Jul 31, 2025 11:53 pm

That's in the ballpark of my readings, Kevin !


AndyClary
Posts: 841
Joined: Sun Jan 06, 2019 11:15 am
First Name: Andrew
Last Name: Clary
* REQUIRED* Type and Year of Model Ts owned: 1914 Runabout 1926 Coupe. Mercury Speedster #1249
Location: Usa

Re: Compression test. Starter vs crank

Post by AndyClary » Fri Aug 01, 2025 9:37 am

Unless the reading is real low don’t get too fixated on the actual number. As Pat brought up you are looking for consistency between the cylinders.

Andy

Post Reply Previous topicNext topic