What is the manufacturers part number
for the large ball bearing, this is the one designed to accommodate a radial load ?
I suspect it will be cheaper source for a bearing supplier rather than the T parts vendors.
Ruckstell bearing part number
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
speedytinc
- Posts: 4872
- Joined: Fri Feb 12, 2021 12:24 pm
- First Name: john
- Last Name: karvaly
- * REQUIRED* Type and Year of Model Ts owned: 14/15 wide track roadster. 23 touring, 27 roadster pickup, 20ish rajo touring
- Location: orange, ca
- Board Member Since: 2020
Re: Ruckstell bearing part number
Originally 212.
Currently 7212
DO NOT USE A 6212 (non side load bearing)
Currently 7212
DO NOT USE A 6212 (non side load bearing)
-
Allan
- Posts: 6833
- Joined: Sun Jan 06, 2019 7:21 pm
- First Name: Allan
- Last Name: Bennett
- * REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
- Location: Gawler, Australia
Re: Ruckstell bearing part number
John makes a good point. There is a much cheaper bearing of the same dimensions, but it will not take the thrust generated by the gearset. It is that thust load which has to be accommodated by the bearing. This also means that the bearing used needs to be installed the right way round.
Allan from down under.
Allan from down under.