Is it normal for a sediment bulb to seep or how do you repair it?
Appears Tobe coming from the main shut off valve and forms a gummy coating on the bulb and drips a drop or two a day. It is on a 23 coupe.
Seeping sediment bulb
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Dennis_Brown
Topic author - Posts: 266
- Joined: Wed Jan 09, 2019 10:14 pm
- First Name: Dennis
- Last Name: Brown
- * REQUIRED* Type and Year of Model Ts owned: 1926 Roadster pickup
- Location: Spring Hill Fl
-
mtntee20
- Posts: 702
- Joined: Sun Jan 06, 2019 2:51 pm
- First Name: Terry & Sharon
- Last Name: Miller
- * REQUIRED* Type and Year of Model Ts owned: 1920 Center Door, 1920 TTWood cab Farm Truck with cable dump grain bed, 1920 TT C-Cab with express bed, 1927 Wood body Dairy Delivery truck
- Location: Westminster, CO
- Board Member Since: 2017
Re: Seeping sediment bulb
Dennis,
I know you do NOT want to hear this, but it's the truth. For a proper fix, the gasoline must be drained from the tank so the sediment bulb can be removed. Once removed, take photos, place match marks, then disassemble the leaking shut off valve. Once disassembled, luck may shine and a good cleaning may resolve the issue.
Most likely, luck will not shine. Lapping the valve to the bulb valve seat, will most likely be needed. TimeSaver is a good lapping compound to use on a sediment bulb valve. Lap until you get a good clean surface between the valve and the valve seat. Clean thoroughly and reassemble. Put some gas in the tank and check for leakage. I suggest a gallon or two to begin with. If there's no leakage, add a couple more gallons. Check for leaks.....add gas, check for leaks. This will minimize the gas needing to be drained IF there are leaks. Waiting a few days between adding gas and checking for leaks, may be necessary.
Option 2: Obtain a second bulb, hopefully good, and install it as a replacement. Lapping the valve in the leaking bulb can be addressed at a later date.
NOTE: Thread sealer is recommended on the bulb to tank connection threads. I HIGHLY recommend GASOILA. This is a thread sealing dope that is highly gasoline/oil resistant. I have found it to work very well in these situations.
Good Luck
I know you do NOT want to hear this, but it's the truth. For a proper fix, the gasoline must be drained from the tank so the sediment bulb can be removed. Once removed, take photos, place match marks, then disassemble the leaking shut off valve. Once disassembled, luck may shine and a good cleaning may resolve the issue.
Most likely, luck will not shine. Lapping the valve to the bulb valve seat, will most likely be needed. TimeSaver is a good lapping compound to use on a sediment bulb valve. Lap until you get a good clean surface between the valve and the valve seat. Clean thoroughly and reassemble. Put some gas in the tank and check for leakage. I suggest a gallon or two to begin with. If there's no leakage, add a couple more gallons. Check for leaks.....add gas, check for leaks. This will minimize the gas needing to be drained IF there are leaks. Waiting a few days between adding gas and checking for leaks, may be necessary.
Option 2: Obtain a second bulb, hopefully good, and install it as a replacement. Lapping the valve in the leaking bulb can be addressed at a later date.
NOTE: Thread sealer is recommended on the bulb to tank connection threads. I HIGHLY recommend GASOILA. This is a thread sealing dope that is highly gasoline/oil resistant. I have found it to work very well in these situations.
Good Luck
-
Rich P. Bingham
- Posts: 1718
- Joined: Sun Feb 13, 2022 11:24 am
- First Name: Rich
- Last Name: Bingham
- Location: Blackfoot, Idaho
- Board Member Since: 2015
Re: Seeping sediment bulb
Terry’s outline is the way to go ! Be sure to tune up the drain petcock at the bottom of the “spud” as well.
A fuel-resistant lubricant called “E-Z Turn” is a great product to use on the valve parts and thread connections. I highly recommend it !!
A fuel-resistant lubricant called “E-Z Turn” is a great product to use on the valve parts and thread connections. I highly recommend it !!
Get a horse !
-
Jim Byrne
- Posts: 6
- Joined: Fri Sep 26, 2025 8:52 pm
- First Name: Jim
- Last Name: Byrne
- * REQUIRED* Type and Year of Model Ts owned: 1917 model t
- Location: Kingman, Az.
Re: Seeping sediment bulb
I had the same problem & bought a new one from Snyder's last week $85 but problem solved and it looked just like the one that I removed
-
John kuehn
- Posts: 4578
- Joined: Sun Jan 06, 2019 8:00 pm
- First Name: John
- Last Name: Kuehn
- * REQUIRED* Type and Year of Model Ts owned: 19 Roadster, 21 Touring, 24 Coupe
- Location: Texas
Re: Seeping sediment bulb
The reproduction sediment bulbs are spot on good. This is a reproduction part that is well worth it if you need one. I bought one for my 24 Coupe after I tried to repair the old one which worked for while. No more worries about any gas tank area leaks.
-
Original Smith
- Posts: 3865
- Joined: Tue Jan 08, 2019 10:43 am
- First Name: Larry
- Last Name: Smith
- * REQUIRED* Type and Year of Model Ts owned: 13 Touring, 13 Roadster, 17 Coupelet, 25 Roadster P/U
- Location: Lomita, California
- MTFCA Life Member: YES
Re: Seeping sediment bulb
If the repro sediment bulbs are so good, why don't they offer the part with the screen in it to us>
-
Rich P. Bingham
- Posts: 1718
- Joined: Sun Feb 13, 2022 11:24 am
- First Name: Rich
- Last Name: Bingham
- Location: Blackfoot, Idaho
- Board Member Since: 2015
Re: Seeping sediment bulb
Do the repro “spuds” even have a screen over the outlet fitting ? Replacement lead washers are a problem too !
Get a horse !
-
big2bird
- Posts: 687
- Joined: Mon Sep 14, 2020 10:57 pm
- First Name: Jeffrey
- Last Name: Hausey
- * REQUIRED* Type and Year of Model Ts owned: Early 23 Touring
- Location: Anaheim, Ca.
- Board Member Since: 2020
Re: Seeping sediment bulb
I would imagine the same reason RM brake springs are only sold in sets.Original Smith wrote: ↑Sun Nov 30, 2025 3:42 pmIf the repro sediment bulbs are so good, why don't they offer the part with the screen in it to us>
-
big2bird
- Posts: 687
- Joined: Mon Sep 14, 2020 10:57 pm
- First Name: Jeffrey
- Last Name: Hausey
- * REQUIRED* Type and Year of Model Ts owned: Early 23 Touring
- Location: Anaheim, Ca.
- Board Member Since: 2020
Re: Seeping sediment bulb
Yes, and I don't know how they make any money on it.Rich P. Bingham wrote: ↑Sun Nov 30, 2025 8:50 pmDo the repro “spuds” even have a screen over the outlet fitting ? Replacement lead washers are a problem too !
Chaffin has the lead washers.