Ok guys, I just got some brass horn connector parts. What is what and what do I have? They were extra grimy so I cleaned them up a bit. The bracket with the tubing still attached seems to be an original due to the fact that it is brazed onto the post, but I’m not sure. Then I have a brass ring that was fitted on the middle tube. All the tubes screw onto the brackets and on my Jon peril double twist horn reed area. Let me know your thoughts.
Thanks
Mike
Brass Horn Specialist Needed
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules