1909-10 sidelight brackets

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules

Topic author
Alex Dragone
Posts: 118
Joined: Tue Mar 12, 2019 8:43 pm
First Name: Alex
Last Name: Dragone
Location: Orange, CT

1909-10 sidelight brackets

Post by Alex Dragone » Wed Dec 11, 2019 1:17 pm

I am having a discussion with a friend and we would like to know if the 1909-10 brackets were originally made out of cast brass or pressed steel and brass plated. I have seen them both ways. It seems to me that originally they were brass plated steel. Can anyone shed light on this?


pete eastwood
Posts: 61
Joined: Sun Jan 13, 2019 6:17 pm
First Name: Pete
Last Name: Eastwood
Location: Southern Califiornia

Re: 1909-10 sidelight brackets

Post by pete eastwood » Wed Dec 11, 2019 2:08 pm

Pressed steel & brass plated .


Wayne Sheldon
Posts: 1740
Joined: Sun Jan 06, 2019 3:13 pm
First Name: Wayne
Last Name: Sheldon
Location: Grass Valley Califunny, USA
Board Member Since: 2005

Re: 1909-10 sidelight brackets

Post by Wayne Sheldon » Wed Dec 11, 2019 6:22 pm

Peter E would KNOW !


Larry
Posts: 116
Joined: Sun Jan 06, 2019 11:03 pm
First Name: Larry
Last Name: Gresh
Location: Berlin center Ohio
MTFCI Number: 15762

Re: 1909-10 sidelight brackets

Post by Larry » Wed Dec 11, 2019 8:16 pm

The side light brackets were pressed steel and brass plated as were the fire wall riser to windshield brackets. Tail light bracket was cast steel and brass plated as well.


Aussie16
Posts: 59
Joined: Sat Jan 05, 2019 9:24 pm
First Name: Warwick
Last Name: Landy
Location: Trarlagon Victoria Australia

Re: 1909-10 sidelight brackets

Post by Aussie16 » Thu Dec 12, 2019 1:46 am

Steel and brass plated. Many other parts on the 09/10 Models were steel and bras plated including the emergency brake lever.

User avatar

Tourabout
Posts: 41
Joined: Sun Jan 06, 2019 4:31 pm
First Name: Robbie
Last Name: Price
Location: Cleveland

Re: 1909-10 sidelight brackets

Post by Tourabout » Thu Dec 12, 2019 5:46 am

The spark and throttle rods and hand crank were also brass plated steel.


Scott Rosenthal
Posts: 162
Joined: Sun Jan 13, 2019 11:29 am
First Name: Scott
Last Name: Rosenthal
Location: Cincinnati OH

Re: 1909-10 sidelight brackets

Post by Scott Rosenthal » Thu Dec 12, 2019 8:16 am

Alex: I cast them in Yellow brass because of the marginal quality of today's brass plating. Originals are heavy brass plated that can be repeatedly polished without wiping the brass off. You can lacquer coat these, but this is temporary protection and will rapidly tarnish under the lacquer. Some have cautioned that cast brass is weaker and therefore prone to a failure. This could be true if your casting alloy is junk, or if you are trying to use this bracket to jack up the car. You will not bend or break these parts by accidentally bumping them.
Regards,
Scott

Post Reply Previous topicNext topic