Early Clutch Arm Bolts

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
Post Reply Previous topicNext topic
User avatar

Topic author
BE_ZERO_BE
Posts: 628
Joined: Sun Jan 06, 2019 12:27 pm
First Name: BOB
Last Name: CASCISA
* REQUIRED* Type and Year of Model Ts owned: 1916 TOURING
Location: POULSBO, WA

Early Clutch Arm Bolts

Post by BE_ZERO_BE » Sun Feb 16, 2020 1:35 pm

In the photo below, the clutch arms are retained on the shaft by bolts - not riveted.
This is in an aluminum hogshead without the reinforcing ribs (early).
What year hogshead would this be?
IMG_2189.JPG
Respectfully Submitted,
Be_Zero_Be

I drive a Model T ... Microseconds don't matter :D

For every Absolute Model T Fact there are at least three exceptions.
Top
User avatar

Mark Gregush
Posts: 5370
Joined: Sat Jan 05, 2019 1:57 pm
First Name: Mark
Last Name: Gregush
* REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1948 F2 Ford flat head 6 pickup 3 speed
Location: Portland Or
Board Member Since: 1999

Re: Early Clutch Arm Bolts

Post by Mark Gregush » Sun Feb 16, 2020 1:53 pm

About june 1911- 1912/13 ish which would fit with non reinforced hogs head. Don't forget the shaft and arms are keyed.
I know the voices aren't real but damn they have some good ideas! :shock:

1925 Cut down pickup
1948 Ford F2 pickup
Top
User avatar

Topic author
BE_ZERO_BE
Posts: 628
Joined: Sun Jan 06, 2019 12:27 pm
First Name: BOB
Last Name: CASCISA
* REQUIRED* Type and Year of Model Ts owned: 1916 TOURING
Location: POULSBO, WA

Re: Early Clutch Arm Bolts

Post by BE_ZERO_BE » Sun Feb 16, 2020 3:22 pm

Thanks Mark.
PDX wins again :lol:
Respectfully Submitted,
Be_Zero_Be

I drive a Model T ... Microseconds don't matter :D

For every Absolute Model T Fact there are at least three exceptions.
Top
Post Reply Previous topicNext topic

Return to “General Discussion Forum”