Ferrachute P2 punch press
-
Topic author - Posts: 1559
- Joined: Thu Jan 10, 2019 3:54 pm
- First Name: Kevin
- Last Name: Pharis
- Location: Sacramento CA
- Contact:
Ferrachute P2 punch press
Making room for bigger and better toys! This is kinda T related, as it regularly dimples new wire wheel rims, and may have even made T parts when it was new. 20 Tons of fun to annoy your neighbors with! Nothing says “it’s Sunday” like the “ka-chunk ka-chunk ka-chunk” of a punch press on a calm morning. You can even tell em good nite too. First one here with a $1 bill and trailer can have it! Approximately 2k pounds and 6.5’ tall
I don’t actually expect anyone to want this thing. Just wanted to give it one last chance at life. Gonna be a shame to scrap it… but it can’t stay here!
I don’t actually expect anyone to want this thing. Just wanted to give it one last chance at life. Gonna be a shame to scrap it… but it can’t stay here!
-
- Posts: 4082
- Joined: Sun Jan 06, 2019 4:06 pm
- First Name: Jerry
- Last Name: Van
- Location: S.E. Michigan
Re: Ferrachute P2 punch press
Advertise it here. These guys will most likely jump at it...
https://www.owwm.org/viewforum.php?f=84
https://www.owwm.org/viewforum.php?f=84
-
Topic author - Posts: 1559
- Joined: Thu Jan 10, 2019 3:54 pm
- First Name: Kevin
- Last Name: Pharis
- Location: Sacramento CA
- Contact:
Re: Ferrachute P2 punch press
Just read on Wikipedia that Ford bought bout 50 Ferrachute presses in 1910, and 500 more later on, this could have been one of them! A must have for the ultimate collection of Ford memorabilia!
-
- Posts: 811
- Joined: Sun Jan 06, 2019 4:14 pm
- First Name: Joseph
- Last Name: Andulics
- * REQUIRED* Type and Year of Model Ts owned: 1926 Fordor, 1926 Truck, 1927 Roadster GOW, RAJO Sprint car
- Location: North Ridgeville, OH
- Contact:
Re: Ferrachute P2 punch press
In my working career I probably scrapped over 250 tons of the old "dog" clutch stamping presses most for not meeting current OSHA standards for press safety. The only advice I can offer to avoid liability issues is to take the motor off and sell it as a non operating press for parts. JMHO
Last edited by henryford2 on Sat May 24, 2025 11:15 am, edited 1 time in total.
-
- Posts: 5018
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
Re: Ferrachute P2 punch press
Looks more like a power hammer for a forge shop.
Wish I had a dollar for every RoussellE OBI I have worked on. I could buy any T I wanted. Dan
Wish I had a dollar for every RoussellE OBI I have worked on. I could buy any T I wanted. Dan
-
Topic author - Posts: 1559
- Joined: Thu Jan 10, 2019 3:54 pm
- First Name: Kevin
- Last Name: Pharis
- Location: Sacramento CA
- Contact:
Re: Ferrachute P2 punch press
The Ferrachute was working ok before I removed the motor and electrical. If someone wants the press, they can have it all. Just didn’t want to scrap the good 5hp motor and foot pedal. The catch pins are worn, but it’s too big for me to take apart to fix, and now it’s in the way.
The RoussellE 1A seen in the pic is replacing the Ferrachute. Will be plenty of press for what I do, and is a much more serviceable size. My neighbors will no doubt miss its Sunday morning serenades, but I have to make room for bigger and better toys!
The RoussellE 1A seen in the pic is replacing the Ferrachute. Will be plenty of press for what I do, and is a much more serviceable size. My neighbors will no doubt miss its Sunday morning serenades, but I have to make room for bigger and better toys!
-
Topic author - Posts: 1559
- Joined: Thu Jan 10, 2019 3:54 pm
- First Name: Kevin
- Last Name: Pharis
- Location: Sacramento CA
- Contact:
-
Topic author - Posts: 1559
- Joined: Thu Jan 10, 2019 3:54 pm
- First Name: Kevin
- Last Name: Pharis
- Location: Sacramento CA
- Contact:
Re: Ferrachute P2 punch press
Better hurry! Tomorrow morning the bigger and better toy will be here, and the punch press will be gone…
-
- Posts: 1400
- Joined: Sun Jan 06, 2019 11:08 am
- First Name: DAN
- Last Name: MCEACHERN
- * REQUIRED* Type and Year of Model Ts owned: too many. '14 touring, 2 depot hacks, 2 speedsters
- Location: ALAMEDA,CA,USA
Re: Ferrachute P2 punch press
Drum Roll......................!! Congratulations!!