Help to ID carb

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules

Topic author
JW21TT
Posts: 57
Joined: Mon Jan 07, 2019 5:37 pm
First Name: Jim
Last Name: Williams
Location: Baldwinsville NY.
Board Member Since: 2012

Help to ID carb

Post by JW21TT » Sun Oct 11, 2020 10:32 am

This model L has steel choke and throttle arms so would it be mid or late prod ?
Thanks for any help.
Jim
[image][/image]
Attachments
image.jpeg
image.jpeg (24.14 KiB) Viewed 274 times
image.jpeg
image.jpeg (27.69 KiB) Viewed 274 times
image.jpeg
image.jpeg (27.3 KiB) Viewed 274 times

User avatar

Mark Gregush
Posts: 2586
Joined: Sat Jan 05, 2019 1:57 pm
First Name: Mark
Last Name: Gregush
Location: Portland Or
Board Member Since: 1999

Re: Help to ID carb

Post by Mark Gregush » Sun Oct 11, 2020 11:29 am

It is a Kingston L4. If it is iron body, used from 1921 to 1926. Can't tell from photos if bronze or iron body. If bronze would be a little earlier.
I know the voices aren't real but damn they have some good ideas! :shock:

1921 Huckster
1925 Cut down pickup

User avatar

Corey Walker
Posts: 258
Joined: Sun Jan 06, 2019 11:46 am
First Name: Corey
Last Name: Walker
Location: Brownsboro, TX

Re: Help to ID carb

Post by Corey Walker » Mon Oct 12, 2020 3:43 pm

Looks like a brass body L4. Those had a smaller bowl nut than the cast iron version. It’s also missing one of the arms for the choke, and it has a late model spray needle. Those bowls will interchange with the early NH bowls (to the left) but have a different drain.
Attachments
81CC0D82-6521-4B3E-9E84-0B2819383D2E.jpeg
48560D1F-1BDF-49F7-A68E-7894B1D745B6.png
Corey Walker, Brownsboro, Texas

Post Reply Previous topicNext topic