This model L has steel choke and throttle arms so would it be mid or late prod ?
Thanks for any help.
Jim
[image][/image]
Help to ID carb
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
JW21TT
Topic author - Posts: 60
- Joined: Mon Jan 07, 2019 5:37 pm
- First Name: Jim
- Last Name: Williams
- Location: Baldwinsville NY.
- Board Member Since: 2012
Help to ID carb
- Attachments
-
- image.jpeg (24.14 KiB) Viewed 301 times
-
- image.jpeg (27.69 KiB) Viewed 301 times
-
- image.jpeg (27.3 KiB) Viewed 301 times
-
Mark Gregush
- Posts: 2802
- Joined: Sat Jan 05, 2019 1:57 pm
- First Name: Mark
- Last Name: Gregush
- Location: Portland Or
- Board Member Since: 1999
Re: Help to ID carb
It is a Kingston L4. If it is iron body, used from 1921 to 1926. Can't tell from photos if bronze or iron body. If bronze would be a little earlier.
I know the voices aren't real but damn they have some good ideas! 
1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup
1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup
-
Corey Walker
- Posts: 268
- Joined: Sun Jan 06, 2019 11:46 am
- First Name: Corey
- Last Name: Walker
- Location: Brownsboro, TX
Re: Help to ID carb
Looks like a brass body L4. Those had a smaller bowl nut than the cast iron version. It’s also missing one of the arms for the choke, and it has a late model spray needle. Those bowls will interchange with the early NH bowls (to the left) but have a different drain.
- Attachments
-
-
Corey Walker, Brownsboro, Texas