Spare tire brace in trunk 26 coupe
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
parrothead
Topic author - Posts: 3
- Joined: Tue Jun 27, 2023 11:04 am
- First Name: Bryan
- Last Name: Wyckoff
- * REQUIRED* Type and Year of Model Ts owned: 1927 touring and 1912 Speedster
- Location: Cherokee Kansas
Spare tire brace in trunk 26 coupe
Is there a brace available for the spare tire carrier that goes in the rear of the trunk on a ‘26 coupe? We bought this coupe about a month ago and the spare carrier was just bolted to the sheet metal skin on the back. I took a picture of a ‘26 roadster while we were out on our hillbilly tour in MO this month. Does anyone sell this brace, or will I need to build one?
-
TMiller6
- Posts: 303
- Joined: Sun Jan 06, 2019 10:11 pm
- First Name: Thomas
- Last Name: Miller
- * REQUIRED* Type and Year of Model Ts owned: 16, 24, 26 Touring - 26 Roadster and Fordor
- Location: SE MI
- Board Member Since: 2006
Re: Spare tire brace in trunk 26 coupe
I never found anything as far as a reproduction brace when I was doing my Runabout. If you’re looking for something close, consider A-163-ABR for the Model A.
Tom Miller
One who cannot find beauty in an engine cannot find beauty in the universe.
One who cannot find beauty in an engine cannot find beauty in the universe.
-
parrothead
Topic author - Posts: 3
- Joined: Tue Jun 27, 2023 11:04 am
- First Name: Bryan
- Last Name: Wyckoff
- * REQUIRED* Type and Year of Model Ts owned: 1927 touring and 1912 Speedster
- Location: Cherokee Kansas
Re: Spare tire brace in trunk 26 coupe
Good suggestion. Thanks Tom!
-
varmint
- Posts: 889
- Joined: Mon Jan 07, 2019 2:02 pm
- First Name: Vernon
- Last Name: Worley
- * REQUIRED* Type and Year of Model Ts owned: October 26, 1926 Coupe
- Location: New Orleans, LA
- Contact:
Re: Spare tire brace in trunk 26 coupe
There are at least two variations of the '26-7 Coupe rear brace. No one is going to see it. half of mine was rusted away and I had to weld the rest. It should conform to the curve of the skin or else the sheet metal will dent in once you torque down the bolts. not my photos below:
- trunk 786181.jpg (31.47 KiB) Viewed 115 times
Vern (Vieux Carre)