Winfield Model N parts
-
Roadsterguy
Topic author - Posts: 11
- Joined: Thu Jan 23, 2020 2:50 pm
- First Name: Rene
- Last Name: Gonzalez
- * REQUIRED* Type and Year of Model Ts owned: 1927 tudor
- Location: Whittier California
Winfield Model N parts
NOS Winfield Model N parts lot. $400 for all shown in the picture. Located in La Mirada Ca. I can ship at your cost
- Attachments
-
-
babychadwick
- Posts: 697
- Joined: Tue Jan 08, 2019 7:03 am
- First Name: Chad
- Last Name: Azevedo
- * REQUIRED* Type and Year of Model Ts owned: 1926 Boattail speedster, 1912 Tourabout project, 1927 Speedster (build), 1929 Buick (future T tow car)
- Location: Henderson, TN
- Board Member Since: 1999
-
Kevin Pharis
- Posts: 1590
- Joined: Thu Jan 10, 2019 3:54 pm
- First Name: Kevin
- Last Name: Pharis
- Location: Sacramento CA
- Contact:
Re: Winfield Model N parts
Early production model N carbs used a model M style bowl, later used a S style bowl
-
Dan McEachern
- Posts: 1424
- Joined: Sun Jan 06, 2019 11:08 am
- First Name: DAN
- Last Name: MCEACHERN
- * REQUIRED* Type and Year of Model Ts owned: too many. '14 touring, 2 depot hacks, 2 speedsters
- Location: ALAMEDA,CA,USA
Re: Winfield Model N parts
Pretty sure the Model N cover is larger than the Model M cover. Just went thru this with Rene. The Model M covers are 2 3/4" across the wider mounting screw spacing. This cover is wider than that. Just FYI. Tied to call Winfield, but one answered...............
-
Roadsterguy
Topic author - Posts: 11
- Joined: Thu Jan 23, 2020 2:50 pm
- First Name: Rene
- Last Name: Gonzalez
- * REQUIRED* Type and Year of Model Ts owned: 1927 tudor
- Location: Whittier California
Re: Winfield Model N parts
The N model cover looks very similar to the the M model but the N model cover is larger
-
babychadwick
- Posts: 697
- Joined: Tue Jan 08, 2019 7:03 am
- First Name: Chad
- Last Name: Azevedo
- * REQUIRED* Type and Year of Model Ts owned: 1926 Boattail speedster, 1912 Tourabout project, 1927 Speedster (build), 1929 Buick (future T tow car)
- Location: Henderson, TN
- Board Member Since: 1999
Re: Winfield Model N parts
Just a good bit different than my N....
"Those who fail to plan, plan to fail"
-
Roadsterguy
Topic author - Posts: 11
- Joined: Thu Jan 23, 2020 2:50 pm
- First Name: Rene
- Last Name: Gonzalez
- * REQUIRED* Type and Year of Model Ts owned: 1927 tudor
- Location: Whittier California
Re: Winfield Model N parts
Is that a later production model N?
-
Kevin Pharis
- Posts: 1590
- Joined: Thu Jan 10, 2019 3:54 pm
- First Name: Kevin
- Last Name: Pharis
- Location: Sacramento CA
- Contact:
Re: Winfield Model N parts
Here’s a page from the 1930 Winfield catalog showing the S style bowl. Don’t have any documentation showing the M style bowl, but here an old thread about the model N carbs, where both styles are discussed
https://www.mtfca.com/discus/messages/5 ... 1451433153
https://www.mtfca.com/discus/messages/5 ... 1451433153
-
Dan McEachern
- Posts: 1424
- Joined: Sun Jan 06, 2019 11:08 am
- First Name: DAN
- Last Name: MCEACHERN
- * REQUIRED* Type and Year of Model Ts owned: too many. '14 touring, 2 depot hacks, 2 speedsters
- Location: ALAMEDA,CA,USA
Re: Winfield Model N parts
Checked today- the MODEL N cover screw spacing on the two screws closest to the throttle body measures 2 7/8" where the Model M covers screws are spaced 2 3/4" apart. Side by side, the two are noticeably different.
M on Left N on Right
M on Left N on Right